Universal Extinguishing Spray 625 ml - ABF FOAM - 2202-80 - Against Accidental Fires
Fire Rating: 5A 21B 15F
Passed shutdown tests according to DIN EN 16856
Also ideal for kitchens - Oils and fats suitable foam
Suitable for use on fire involving electrical voltages up to 1.000 V, at a minimum distance of 1 meter.
More use situations
Extinguishing spray is an essential device for home, for office, for camper and many other uses. Suitable for solid materials, flammable liquids, fats (up to 15 liters).
Ready for use
With the size of a standard spray can and can be easily positioned in any room and/or fixed with bracket at one position where is easily visible (first aid kit, work station, ecc.). In this time, the extinguishing spray is at hand precisely in the places where fires are most likely to occur. If a fire begins, everyone can intervene quickly.. You don't waste precious seconds looking for or reaching for a fire extinguisher. The general rules of behavior in the event of fire must always be respected.
Easy and safe to use
The use of extinguishing spray is very intuitive and the operator also without training can't go wrong. It is equipped with a protective cap which can be extracted from the body of the can with minimal effort. The red head, now visible, is as easy to use as a standard spray.
An accurate quality control during production process ensures that the extinguishing spray will be reliable and functional.
Maintenance free
The bottle not required any type of maintenance/repairs. The extinguishing system and filling quantity are studied for single use, so also after a partial use the spray must be replaced. The life and working of extinguishing spray are guaranteed for 5 years .
How does it work
When press the dispensing head, the extinguishing agent get out. The specific jet of Micro-Fog-Technology© allow an efficacious extinguishing effect. The high performance foam is a water-based solution. The water has a high capacity to bond with heat, this allow a high cooling effect. At same time, the thermal reaction conditions are blocked for not add flammable gas. The degree of droplet fragmentation determines the optimal contact surface for heat transfer. The additives added at water change its surface tension and, with pressure and geometry of dispensing head, film-forming foam is generated.
Instructions for use
After to remove check strip, remove protection cap and press the dispensing head (red). Aim the jet at base of flames.
Keep a safety distance from the fire. In case of contact with eyes or mouth, rinse with water.
*Note: instructions are also present on the label of spray. Instructions in 3 languages : Italian - English - German.
TECHNICAL SPECIFICATIONS:
- Appearance: Designed as an aluminum aerosol bottle, the device is therefore classified as an aerosol
- Dimensions: Diameter 74 mm - Height 280 mm
- Full weight: ~ 850 g
- Content: 625 ml extinguishing agent
- Pressure at 20°C: ~ 8,5 bar
- Burst pressure of bottle 27 bar
- Jet distance: ~ 3 m
- Discharge time: ~ 22 seconds
- Propellant: Nitrogen
- Density: ~ 1,12 g/cm3
- Operating temperature: -5°C/+60°C
- Safety range -5°C/+60°C (in conformity at aerosol directive)
- Expiring: 5 years (check the expiring date at bottom of bottle)